Owing to optimized and proven cuts, field-tested steel types as well as a special heat treatment developed by LUKAS our HSS rotary burrs have become a particularly efficient and effective solution in milling a great number of materials. Due to the variety in shapes and profiles the LUKAS HSS burrs can be exactly matched with the relevant application in milling and cutting. Shape, profile and tooth geometry of each burr head of the LUKAS HSS burrs have been designed for a particular application. Therefore our HSS burrs are especially suited for milling and deburring as well as preparing and levelling of welding seams in off-hand application.
Industry | ||||
---|---|---|---|---|
![]() |
MFA Burrs, Shape A, Cylinder Diameter 3 to 16 mm with single cut, cut 2 and 3 with chip breaker, available with shank 6 mm |
|||
![]() |
MFAS Burrs, Shape A, Cylinder with end cut Diameter 6 to 16 mm with single cut and rotary files with cut, cut 2 and 3 with chip breaker, available with shank 6 mm |
|||
![]() |
MFC Burrs, Shape C, Cylindrical round nose Diameter 3 to 12 mm with single cut and rotary files with cut, cut 2 and 3 with chip breaker, available with shank 6 mm |
|||
![]() |
MFD Burrs, Shape D, Spherical Diameter 3 to 16 mm with single cut and rotary files with cut, cut 2 and 3 with chip breaker, available with shank 6 mm |
|||
![]() |
MFE Burrs, Shape E, Oval Diameter 6 to 16 mm with single cut, cut 2 and 3 with chip breaker, available with shank 6 mm |
|||
![]() |
MFG Burrs, Shape G, Arch pointed nose Diameter 6 to 16 mm with single cut and rotary files with cut, cut 2 and 3 with chip breaker, available with shank 6 mm |
|||
![]() |
MFH Burrs, Shape H, Flame Diameter 3 to 17 mm with single cut, cut 3 with chip breaker, available with shank 6 and 8 mm |
|||
![]() |
MFK Burrs, Shape K, Club Diameter 6 to 12 mm with single cut with chip breaker, available with shank 6 mm |
|||
![]() |
MFL Burrs, Shape L, Round nose Diameter 10 to 16 mm with single cut, cut 2 and 3 with chip breaker, available with shank 6 mm |
|||
![]() |
MFM Burrs, Shape M, Pointed nose Diameter 3 to 12 mm with single cut and rotary files with cut, cut 2 and 3 with chip breaker, available with shank 6 mm |
|||
![]() |
MFN Burrs, Shape N, Inverted cone Diameter 3 to 12 mm with single cut, cut 3 with chip breaker, available with shank 6 mm |
|||
![]() |
MFNS Burrs, Shape N, Inverted cone with end cut Diameter 12 mm with single cut, cut 3 with chip breaker, available with shank 6 mm |
|||
![]() |
MFW Burrs, Shape W, Cylindrical multiple concave burrs Diameter 6 mm with 16 teeth, diameter 8 mm with 18 teeth, available with shank 6 mm |
|||
![]() |
Miniature burrs, shank 3 mm Various shapes with diameters starting from 1.6 mm with single cut 5 |
|||
![]() |
Miniature burrs, shank 6 mm Various shapes with diameters starting from 3 mm with single cut 5 |
|||
![]() |
Burrs with internal thread Various shapes with internal thread M8, M10 and M12 with single cut cut 2 and 3 with chip breaker |
|||
![]() |
Tool sets 10 and 20 piece sets with rotary burrs with various shapes and cuts |